Tubular Impact Testers
Many surface coatings are subject to the risk of damage by impact. Impact testers allow reproducible conditions of impact to be defined. Impact Testers allow pass/fail limits to be established and a classification of the coating to be achieved.
This instrument consists of a graduated vertical tube mounted into a solid base. This tube acts as a guide for an impacting weight of pre-determined mass. The height from which this falls is variable. By using the locking collar, exactly the same force of impact can be produced for each test. The weight and indenter are combined and strike the panel directly.
The test panel is placed on the die. The panel is held firmly by a clamping sleeve. The weight is raised to a set height and released. The height is increased by 2.5 cm (1")1". (2.5cm) intervals until coating failure is seen. The Testers can be used as a pass/fail test by calculation of the impact energy (height x mass), and for the classification of the test sample. For detailed procedures, please refer to the relevant national standard.
- Sturdy construction & heavy duty frame/base
- Easy clamping & depth adjustment (DIN EN ISO)
SH806/25 - BS6496-84
SH806/40 - ASTM D2794
SH807 - ISO 6272, DIN55669, BS3900 : E13
Product succeeded by TQCSHEEN Impact Test
Get a quotation
|SKU||Name||Add to quote|
|SH806/25||Tubular Impact Tester, 908g weight, 25" Tube with weight locking collar|
|SH806/40||Tubular Impact Tester, 1.8kg weight,40" Tube with weight locking collar|
|SH807||Tubular Impact Tester, 1kg weight, 1m Tube fitted with depth adjustment ring and height adjustable weight locking collar|
To request a quotation please click the "Add to quote" button next to each product you require.
Then select the "View and send my quotation" button above or at the top to review and send your quotation.
If you cannot find the product you are looking for, or have an additional request for a product please fill in our enquiry form.